Close
Menu

Workbenches & Workstations

View as Grid List
Sort by
Display per page

Taurus Cantilever Workbenches

From £687.30 incl VAT
  • Workshop bench suitable for use in assembly, production & light engineering environments.
  • 20mm high density laminate worktop with 3mm PVC edging
  • Powder coated, iridium silver finish on the workbench frames
  • Cantilever design allows maximum leg room
  • Height adjustable feet for easy levelling
  • Accessories available - see below for details
  • Each drawer set can be fitted either on the left or right of the bench. Cupboard sets can only be positioned on the right hand side.

Adjustable Height Work Bench

£357.00 incl VAT
  • Some assembly required
  • Solid 38mm MDF worktop with a rubber edge
  • Height adjustable in 25mm increments
  • Constructed from steel angle
  • Half depth bottom shelf with rear lip
  • Capacity 230kg evenly distributed

Workbench with Shelf TPH

From £1,042.86 incl VAT
  • Workbench height adjustable from 650 to 900mm
  • Includes upright profiles & a 310mm deep laminate shelf
  • Upper shelf is height adjustable from 1080 to 1550mm Frames are epoxy coated steel
  • Max Load: 150-300kg
  • Supplied Knock Down
  • Frames are of epoxy powder coated steel in dark grey RAL7045
  • Worktops of 25mm melamine-laminate on particle board

Workbench with Shelf TPH ESD

From £1,355.57 incl VAT
  • Height adjustable from 650 to 900mm
  • Can also be supplied as a line or angle extension
  • Max Load: 150-300kg
  • Worktops of 26mm ESD-Laminate on particle board
  • ESD Benches have earth via protective 1 mega-ohm resistor
  • Supplied Knock Down
  • Frames are of epoxy powder coated steel in dark grey RAL7045

Rivet Full Undershelf Workstation

From £377.85 incl VAT
  • No nuts & bolts required - the system simply taps together with the use of a hammer/mallet

Rivet Half Undershelf Workstation

From £357.34 incl VAT
  • No nuts & bolts required - the system simply taps together with the use of a hammer/mallet

Rivet T Bar Workstation

From £332.73 incl VAT
  • No nuts & bolts required - the system simply taps together with the use of a hammer/mallet

Rivet T Bar Workbench

From £222.79 incl VAT
  • No nuts & bolts required - the system simply taps together with the use of a hammer/mallet

Filter by:

Clear All

Filter by

Min: £222.00 Max: £2,497.00
£ £222 £2497£
banner